|  Home  |  About Us  |  Our Products  |  Quality  |  Our Clients  |  Contact Us  |  Feedback Form  | 
 
       Welcome To
  
    SUSUMO ::::::::


..... Solutions
       Through
         Design ......

 

 

 

 
SUSUMO
DREDGER

PERFECTLY PRACTICAL PRACTICALLY PERFECT.

The Machine at work.  The arm removes the slit
and unloads into the silt-tub. These silt-tubs
(Placed inside Float-Tubs) when full are pulled
to the bank by a nylon rope.
The loaded Slit-Tubs are removed from
the float-tubs with the help of
portable Winch.

The Machine works miraculously by floating
over the water. The main structure consists of
a float hollow pontoon which helps the machine to
float. The pontoon has 3 legs ending into cylindrical
hollow wheels made of  steel, which helps the
pontoon to anchor its position while excavating.
The hydraulic arm with a small bucket excavates
silt from bottom of the lake / nalla. Useful for
narrow as well as wide nalla / lake desilting.
 
For moving to & fro in water of over land the wheels are aligned parallel to the machine
& the arm pushes or pulls against the ground thus moving the machine.
 
The machine has to be transported over long distance in a trailer.  It has to be loaded
on the trailer by a crane.


Portable Winch unloads Slit-Tubs on
ground to make a heap at
an accessible point.
BACK TO DREDGERS

 


 
 

  Copyright © 2000 Susumo Engineering. All rights reserved.